3DLac

3Dlac (400 ml) – Professional spray for perfect adhesion in 3D printing

Forget about models coming loose and wasted printing time. 3Dlac is the global standard in adhesion for FDM 3D printers. This specially developed spray ensures that the first layer of your model adheres perfectly to the base, eliminating the risk of shifting, deformation, or unwanted loosening during the printing process.

The large 400 ml package is an economical choice for regular printers, print farms, and professional workshops where reliability is paramount.

Why is 3Dlac the market leader?

Unlike substitutes such as hairspray, 3Dlac was developed in a laboratory specifically for the needs of 3D printing. Its unique composition reacts to temperature: it holds firmly when hot, and the model "springs off" on its own after cooling.

Main advantages of 3Dlac 400 ml spray:

• Extreme adhesion: Eliminates warping even on large and demanding objects.
• Versatile use: Perfect results with PLA, PET-G, ABS, ASA and other common filaments.
• Surface-friendly: Suitable for glass, mirrors, and PEI printing plates. Leaves no aggressive residue.
• Easy removal of prints: Once the printing pad has cooled down (usually below 30°C), the model can be removed with just the touch of a finger.
• High yield: The large package lasts for hundreds of printing hours thanks to the ability to apply only a thin mist.

Instructions for use for maximum print stability

Achieving professional results with 3Dlac is a matter of seconds:

1. Cleaning: Remove dust and grease from the print bed (we recommend IPA).
2. Application: Shake the spray and apply a light, even coat to the cold pad from a distance of approx. 20 cm. One quick stroke is enough.
3. Heating: Set the pad temperature according to the material used (e.g., 60 °C for PLA) and start printing.
4. Cooling: After printing, allow the pad to cool completely. The model will release without the need for a spatula or brute force.
5. Repeating: If you are printing in the same place, simply "refresh" the layer with a light spray before starting again.

Technical specifications:

• Volume: 400 ml
• Adhesion type: Heat activated
• Intended use: FDM/FFF 3D printers
• Compatibility: Glass pads, mirrors, smooth and textured PEI sheets