Filament Polymaker PolyLite PETG Grey [1,75mm, 1kg]

Polymaker™ PETG – A new generation for high-speed 3D printing

Polymaker™ PETG is the successor to the popular PolyLite PETG series, revolutionizing speed and durability. This new formula has been designed to handle high-speed printing without compromising strength or surface quality.

+1

It is the ideal "all-rounder" material, combining the ease of printing of PLA with the mechanical and thermal resistance of ABS.

Key advantages of Polymaker™ PETG

Extreme speed: Thanks to high-flow technology, you can print at speeds of up to 300 mm/s (and even over 500 mm/s with high-flow nozzles).

Superior layer adhesion: The new formulation ensures excellent adhesion between layers, resulting in extremely strong and tough parts.

Dimensional stability: Minimal warping and high precision ensure that your parts will fit exactly as they should.

Chemical and heat resistance: Withstands temperatures up to ~70 °C (HDT) and is suitable for both indoor and outdoor use.

From prototypes to functional parts

Polymaker™ PETG offers the perfect balance between stiffness and flexibility. It is the ideal choice for:

Technical components: Gears, brackets, handles, and fixtures.

Outdoor equipment: Sports accessories and garden tools.

Cosplay and design: Props with a professional finish that look great right out of the printer.

Easy printing and compatibility

This filament is designed to run smoothly on almost all FDM printers.

No enclosure needed: PETG can also be printed on open printers without a closed chamber.

AMS support: Fully compatible with automatic systems (such as Bambu Lab AMS) for multi-material printing.

Jam-Free™ technology: Minimizes the risk of nozzle clogging even during long print jobs.

Technical recommendations and maintenance

For perfect results, pay attention to humidity.

Print temperature: 230°C–240°C (depending on speed)

Bed temperature: 70°C–80°C

Print speed: Up to 300 mm/s as standard (depending on printer)

⚠️ BEWARE OF MOISTURE: PETG is a highly hygroscopic material (it absorbs moisture from the air). If the filament gets wet, excessive stringing may occur. We recommend storing it in a dry place and drying it before printing if necessary.