Filament ABAFLEX PETG+ CF Anthracite Refill [1,75mm, 0.75kg]

PETG+ Carbon Fiber is a filament ideal for printing strong, rigid, yet lightweight parts. It combines the properties of classic PETG—durability, easy printability, and low shrinkage—with the advantages of carbon fiber, which increases mechanical strength, dimensional stability, and gives prints an attractive matte finish. These properties minimize deformation and give the resulting parts a professional technical look. The material is suitable for functional prototypes, structural parts, holders, covers, and design products where strength, precision, and aesthetics are key.

!!! WARNING !!! – Carbon fibers are abrasive and a hardened nozzle must be used for long-term printing. According to the manufacturer, the filament is not suitable for use in AMS and AMS Lite (Bambu Lab).

Properties

• ✅ High rigidity and strength – carbon fibers reinforce the material by 20% and ensure minimal deformation during printing and use.
• ✅ Easy printing – printing settings similar to PETG, no closed chamber required.
• ✅ Low shrinkage – ensures accurate printing even for larger models.
• ✅ Matte finish – aesthetic, resistant to visible layers and scratches.
• ✅ Carbon fibers 4 mm long
• ✅ String diameter stability allows the use of a 0.4 mm nozzle

Technical parameters

• Material: PETG + carbon fibers
• Filament diameter: 1.75 mm (tolerance ±0.02 mm)
• Recommended nozzle temperature: 240–270 °C
• Recommended bed temperature: 70–90 °C
• Recommended nozzle: ≥ 0.4 mm (we do not recommend a 0.2 mm nozzle, as carbon fibers can clog smaller nozzle diameters)